Bathroom Mirror Hanging with Full Cabinet Hardware Set
Know what you need?
A Hastings bathroom remodel was nearly finished. The corner vanity, quartz top and vanity lights were already in, but the wall above was bare and every cabinet door and drawer front was still without a pull.
For the hardware I made a small jig off the first drawer front and used it to mark every remaining pull, so the placement is identical across all the doors and drawers instead of measured one at a time. The mirrors went up second, however, one of them landed where it would cover a wall outlet. So I stopped and had the homeowner confirm that was what they wanted before drilling. After getting confirmation, I got them set level in the gap between the backsplash and the vanity lights so the spacing read even across both sides of the corner.
Both mirrors sit level and solid, and every door and drawer front carries a pull in the same spot relative to its edges. I vacuumed the drilling dust off the counter and floor and walked the homeowner through the finished work before packing up. One more line crossed off their bathroom remodel list.
